Ultimate Crunch Kit Instructions
Table of Contents:
Bingsu Slime Instructions
Floam Slime Instructions
Slushee Slime Instructions
Snow Fizz Slime Instructions
How to Make Bingsu Slime
Ingredients:
- Elmer's Clear Glue
- Activator
- Slime Slip
- Slime Scent
- Bingsu Beads
Tools:
- Mixing Bowl
- Spoon or Spatula
- Teaspoon
Step 1: Grab a mixing bowl, spoon or spatula, a teaspoon measuring spoon, and the provided activator.
Step 2: Empty the entire bottle of Elmer’s clear glue into your bowl.
Step 3: (Optional) Add a few drops of the sugar scent into the bowl. If you like a strong scent, add a bit more.
Step 4: Add 2 teaspoons of slime slip to your bowl.
Step 5: Stir together until the ingredients are evenly combined.
Step 6: Add 1 teaspoon of activator.
Step 7: Mix thoroughly for about 2 minutes. Your slime will start to clump together. The mixture should remain a bit sticky, making it easier to incorporate the bingsu beads and ensuring they stick well into the slime.
Step 8: While the slime is still sticky, add the entire pack of iridescent bingsu beads. Gently fold in the beads until they are fully incorporated into the slime.
Step 9: Add 2 more teaspoons of activator and mix, mix, mix. The slime may get more strands and clumps, but don't get discouraged; you want to break those down by mixing. The more you break them up, the less sticky the slime will be. You know you’re doing it right if your arm starts to get tired!
Step 10: Use 1 finger to test the slime and see if it is sticky.
Step 11: If it sticks to you, add another 1/2 teaspoon of activator and mix again! The slime may look stringy and/or clumpy. That's okay! Trust the process and keep stirring as vigorously as possible. It may feel like it takes a while to fully incorporate; just stick with it! Repeat this process until your slime no longer feels sticky, but be careful! Don’t add too much activator; otherwise, your slime will become hard. You want the slime to be soft and stretchy but not sticky.
Step 12: Now you have bingsu slime!
Step 13: Decorate to your heart’s content with the sprinkles and charms!
Step 14: Don’t forget to name your slime! Write your slime’s name on the blank label on the side of your slime jar.
Step 15: Store your slime in the provided 8 oz jar. Always keep your slime in an airtight container when you’re not playing with it to prevent it from drying out so that it lasts as long as possible.
How to Make Floam Slime
Ingredients:
- Elmer’s Clear Glue
- Slime Slip
- Slime Scent
- Floam Beads
- Activator
Tools:
- Mixing Bowl
- Spoon or Spatula
- Teaspoon
Step 1: Gather a mixing bowl, spoon or spatula, a teaspoon measuring spoon, and the provided activator.
Step 2: Empty the entire bottle of Elmer’s clear glue into the bowl.
Step 3: Add 1 teaspoon of Slime Slip into the bowl.
Step 4: Add 2-3 drops of the scent (optional).
Step 5: Mix thoroughly until evenly combined.
Step 6: Add 1 teaspoon of activator and mix vigorously. You will notice strands and clumps start to form. Keep mixing! This is a good sign.
Step 7: While the slime is still really sticky, add all of the floam beads. Mix thoroughly and ensure all the beads are coated in the slime.
Step 8: Add 1 more teaspoon of activator and use your hands to knead into the slime. As you knead you will be breaking up the strands and clumps in the slime. The more you break them up, the less sticky the slime will be.
Step 9: If the slime still feels sticky, add 1/2 teaspoon of activator at a time and knead into the slime until it no longer feels sticky.
Step 10: Decorate to your heart’s content using the provided charms! Over time, your slime will naturally turn a magenta color from the floam beads.
Step 11: Don’t forget to name your slime! Write your slime’s name on the blank label on the side of your slime jar.
Step 12: Store your slime in the provided 8oz jar. Always keep your slime in an air-tight container when you’re not playing with it so it can last as long as possible. Happy crunching!
How to Make Slushee Slime
Ingredients:
- Elmer’s Glue
- Slime Colorant
- Slime Scent
- Victory Pellets
- Activator
Tools:
- Mixing Bowl
- Spoon or Spatula
- Teaspoon
Step 1: Empty the entire bottle of Elmer’s school glue into your empty bowl.
Step 2: (Optional) Add 3-5 drops of the Fruit Slush scent.
Step 3: Add 2-5 drops of the colorant. The more you add the darker the color of your slime.
Step 4: Stir everything together. Give it a good 30+ seconds of mixing before moving on to the next step.
Step 5: Add all of the Victory Pellets into your mixing bowl.
Step 6: Gently fold and mix the Victory Pellets into the glue mixture until they are fully mixed in. This may take a few minutes. It’s important that they are fully incorporated into the glue mixture to ensure they will stick in your slime.
Step 7: Add 3 teaspoons of activator into your bowl.
Step 8: Mix THOROUGHLY! It may take 1-2 minutes to do this properly. It is super important to mix in the activator extremely well to achieve the best results.
Step 9: At this point your slime should still be very sticky and gluey. This is ok. Now add 2 more teaspoons of activator into your bowl.
Step 10: Mix THOROUGHLY! It may take 1-2 minutes to do this properly.
Step 11: Use 1 finger to test the slime and see if it is sticky. If it does not stick to your finger easily, move on to step 14. If it does stick, add 1/2 teaspoon of activator and mix thoroughly into your slime. Repeat this process until you feel the slime is no longer sticky, and is at a consistency that you enjoy. It should not be too firm, otherwise it will not be able to hold in the Victory Pellets.
Step 12: Knead the slime with your hands. Pull and stretch it for a few minutes to make sure there are no clumps or strings in your slime.
Step 13: Now you have Slushee slime! Pull, stretch, and squeeze the slime. It should be crunchy, and bubbly.
Step 14: decorate your slime to your heart's content using the fruit themed charms!
Step 15: Don’t forget to name your slime! Write your Slime’s name on the blank label on the side of your Slime jar.
Step 16: Store your slime in the provided empty 8oz jar. Always keep your slime in the air-tight container when you’re not playing with it so it can last as long as possible.
How to Make Snow Fizz Slime
Ingredients:
- Elmer’s Glue
- Slime Colorant
- Slime Scent
- Snow Fizz
- Activator
- Unscented Lotion
Tools:
- Mixing Bowl
- Spoon or Spatula
- Teaspoon
Step 1: Grab a mixing bowl, spoon or spatula, lotion, a teaspoon measuring spoon, and the provided activator.
Step 2: Empty the entire Elmer’s school glue bottle into your bowl.
Step 3: Add 1/2 teaspoon of lotion.
Step 4: (Optional) Add a few drops of the winterberry scent into the bowl. If you like a strong scent, add a bit more.
Step 5: Stir together.
Step 6: Add 1 teaspoon of activator.
Step 7: Mix thoroughly for about 2 minutes. Your slime will start to clump together. The mixture should remain slightly sticky, making it easier to incorporate the snow fizz powder and ensuring it sticks well into the slime.
Step 8: Slowly add all of your snow fizz powder into the bowl. Mix thoroughly until all of the snow fizz powder is coated in the slime.
Step 9: Use 1 finger to test the slime and see if it is sticky.
Step 10: If it sticks to you, add another 1/2 teaspoon of activator and mix again! The slime may look stringy and/or clumpy. That's okay! Trust the process and keep stirring as vigorously as possible. It may feel like it takes a while to fully incorporate; just stick with it! Repeat this process until your slime no longer feels sticky, but be careful! Don’t add too much activator; otherwise, your slime will become hard. You want the slime to be soft and stretchy but not sticky.
Note: if your slime feels hard at any point, add lotion, one half teaspoon at a time. Mix thoroughly between spoonfuls (you may only need one).
Step 11: Split your snow fizz slime into 3 equal parts.
Step 12: Add 1/4 teaspoon of the blue colorant to one part of the slime and mix it up with your hands until the slime is evenly colored.
Step 13: Add 1/4 teaspoon of the magenta colorant to the second part of the slime, and mix it up with your hands until the slime is evenly colored.
Step 14: Now you have 1 piece of blue slime, 1 piece of magenta slime, and 1 piece of white slime. Layer the 3 slimes into the jar however you’d like to create a fun design.
Step 15: Decorate to your heart’s content with the bingsu beads and charms!
Step 16: Don’t forget to name your slime! Write your slime’s name on the blank label on the side of your slime jar.
Step 17: Store your slime in the provided 8 oz jar. Always keep your slime in an airtight container when you’re not playing with it to prevent it from drying out so that it lasts as long as possible.
Step 18: Once you play with the layered slime and mix it up, it will turn into a nice purple color.